Angle bracket made of solid cardboard, V profile 60x60x3mm, length 500mm

Cardboard Angle 60×60×3 mm, length 500 mm – Maximum pallet reinforcement XXL 📦

A three-millimeter layer of solid cardboard on each side of the angle creates an extremely strong protective shield for heavy pallet loads. The profile with 60 × 60 mm arms distributes the tension of the strapping tapes and the mass of the stacked pallets over a larger surface, eliminating point crushes. The 500 mm section protects almost the entire edge of the column, increasing stack stability. One piece weighs about 0.120 kg, maintaining a favorable weight-to-load ratio. The natural brown color (KRAFT paper) emphasizes the ecological character. Ideal for bricks, cement bags, wood-based panels, large furniture or industrial machines ⭐.

What is a solid cardboard corner?

Cardboard corner is a protective profile in the shape of the letter "L", covering two planes of the packaging and the corner itself. Made of multilayer solid cardboard, it effectively disperses very large compressive forces during strapping with PET/steel tape, forklift transport and pallet stacking. The rigid structure 3 × 60 × 60 mm creates a "reinforcing beam" - boxes and bags are not crushed, and the load retains its shape even with strong vibrations.

The assembly takes a few seconds: just apply the profile to the corner of the pallet (usually four or eight pieces) before wrapping with stretch film. Large 60 mm arms automatically set at a right angle, immovably encompassing the edge. After unloading, the corners can be removed and reused or recycled.

Material - solid cardboard (KRAFT)

The profile is made of glued layers of high-density KRAFT solid cardboard. Laminating sheets at 90° creates a very rigid structure resistant to compression and impact, while remaining light and 100% biodegradable.

• Composition: 100% cellulose fiber - without plastic, halogens and toxic additives.
• Layered structure: tightly compressed sheets of paper build a 3 mm thick wall.
• Crush resistance: withstands multi-ton vertical pressure and strapping tape pressure without deformation.
• Neutrality: odorless, chemically neutral - safe for indirect contact with food or pharmaceuticals.
• Finishing options: PE hydrophobic coating (outdoor transport), beveled edges, non-standard lengths.

🛡️ Corner properties - protection & rigidity

• 🛡️ Maximum 360° Protection: 60 mm arms extend the protective zone, securing large pallet edges.
• 📏 Pressure dispersion: transfers even hundreds of kilograms of strap force without damaging the packaging.
• 🏗️ Higher stack load capacity: allows secure stacking of heavy pallets (building materials, big bags).
• 🔄 Multiple use: the profile retains properties after many rotation cycles.
• ⚖️ Optimal weight-strength ratio: only 0.12 kg with a very large support surface.

Resistance to external factors

• 💧 Humidity: standard hygroscopic; PE coating provides full hydrophobicity.
• 🧪 Chemicals: paper susceptible to oils and solvents - PE coating increases chemical resistance.
• 🌡️ Temperature: stable from -20 °C to +70 °C - does not crumble in frost, does not soften in heat.

🚚 Applications in Transport and Logistics

• Construction bags (cement, plaster, mortars), granules, fertilizers - even pressure without tearing the foil.
• Bricks, blocks, tiles - reinforcement of the edges of compact packages on the palette.
• OSB, MDF, HDF boards, timber - stiffening when strapping with steel tape.
• Upholstered furniture XXL, reception counters - protection of wide edges and fronts.
• Industrial equipment and machine components - stabilization in wooden boxes and on pallets.

🏭 Industries using 60 mm corner brackets

• Construction & DIY – bricks, blocks, construction boards.
• Chemical industry – big bags, granules, fertilizers.
• Wood & furniture – wood-based boards, tables, countertops.
• AGRO & gardening – bags with substrate, vegetable crates.
• 3PL Logistics – consolidation of heavy multi-pallet loads.

💰 Logistic and economic benefits

• 💸 Low unit price: high protection with minimal investment costs.
• ⚖️ Optimal weight: 0.12 kg does not increase the shipping weight compared to steel corners.
• 📐 Space saving: profiles stored nestingly - more pieces on the return pallet.
• ⏱️ Quick assembly: no tapes, glues, tools - shortens packing time.
• 🔄 Reusability: maintains shape even after several transport cycles.
• 📉 Reduction of losses and complaints: fewer broken bags, deformed boxes, and shifted layers.

⚙️ Cardboard corner production process

KRAFT tapes are glued, wrapped at a right angle, pressed and dried. After stabilization, the "V" profile 60 mm is cut into 500 mm sections. Each batch undergoes density control, compression strength and tolerance ±1 mm.

🏆 Advantages of cardboard corners in collective packaging

• 🛡️ Comprehensive edge protection – edges do not get crushed.
• 📦 Pallet stability – the load does not shift during transport.
• 🏗️ Safe stacking – higher load capacity of the entire pallet column.
• ⏱️ Faster packing – assembly in seconds, no tools needed.
• 💰 Lower claim costs – fewer corner damages.
• 🌱 Eco-friendly material – recycled paper, easy to recover.

♻️ Recycling and ecology

The profile is 100% recoverable in the waste paper stream or biodegradable under natural conditions. When burned in energy recovery facilities, it does not emit toxic gases.

⚖️ Solid cardboard vs PE Foam – key differences

The table below compares both solutions in the context of heavy loads (cardboard corner) and delicate products (foam profile):

If you are looking for protective profiles made of PE foam, check out our full offer ➜

⚙️ Technical specification

• Model/Name: Solid cardboard corner 60 × 60 × 3 mm
• Material: layered solid cardboard (KRAFT paper)
• Wall thickness: 3 mm
• Arm width: 60 mm × 60 mm
• Length: 500 mm
• Weight: ≈ 0.120 kg/pcs.
• Color: brown

🛠️ Custom product configurators - match the filling to your process

In addition to ready-made corner protectors, you can order dedicated PE foam sheets and cardboard separators in just a few clicks, creating a complete, layered protection system tailored to your logistics.

🔹 Custom PE foam sheets

In the %%%p:1021:foam sheet creator%% , you provide the length, width, and thickness (10–50 mm) and choose the color (white / black) - the online price appears immediately. The sheets serve as:

• 🛡️ Cushioning separators between layers of stacked goods.
• 📐 Spacers inside collective cartons, creating a buffer around the product.
• ✂️ Disposable inserts cut at the packing station for unusual shapes.

🔸 Custom cardboard separators

The %%%p:1151:cardboard separator creator%% allows you to choose the format, number of layers, and paper weight. The separators will work as:

• 📦 Layer stabilizers in packs of bottles or cans (even pressure distribution).
• 🧩 Dividers when stacking cartons and crates - protect the top lids from being crushed.
• ♻️ Eco-friendly filler - 100% paper, fully recyclable.

🚀 How to combine elements into a coherent system?

1. Reinforce the corners of the pallet with 60 × 60 × 3 mm corner protectors for maximum rigidity.
2. Separate the layers of goods with PE foam sheets to dampen shocks and protect surfaces.
3. Add cardboard separators to the top of each layer to evenly distribute pressure and facilitate stacking.
4. Order everything in one basket - the configurators will calculate the online price, and we will synchronize the production of all elements to arrive in one delivery.

💡 Why is it worth it?

• ⚡ Instant price - immediate quote without emails and waiting.
• 🎯 Zero material loss - you order the exact size that fits your product.
• 📉 Less logistics damage thanks to a tailored, layered protection.
• 🛒 One invoice - corner protectors, foam, and separators in one basket.
• 🚚 Shortened lead time - parallel production of components under your order.

📞 Wholesale orders and advice

Do you pack blocks, bags, plates or machines in large volumes? Contact us - we will prepare a pallet offer for 60 × 60 × 3 mm cardboard corner protectors (or other dimensions) and adjust PE foam sheets and cardboard separators to your logistics, so that the entire supply chain is fast, safe and economical.